Smart Panel TutorialQuick ReferenceoverviewHow Do IQuick ReferenceTroubleshootingContact UsClassrooms

VCR Operation

The VCRs in most classrooms play VHS and S-VHS tapes only. The VCRs DO NOT support PAL, SECAM, C-VHS, Hi-8, 8mm, or any other formats.

Instructions:
1. Make sure the system power is on.
2. Lower the screen to the proper level.
3. Select the VCR by pressing the button under the "VCR" label.
Older Model Press the green button on the panel labeled "VIDEO 1." The button will illuminate.
4. Insert the tape into the VCR.
5. Use the Play, Stop, Fast Forward, Rewind, and Eject buttons to control the VCR.
6. Adjust the volume as needed in the upper right corner of the SmartPanel.
7. Make sure the room is properly dimmed.
8. When you are through, eject and remove the tape, and turn the SmartPanel power off.

| Home | Overview | How Do I? | Quick Reference | Troubleshooting | Contact Us | Classrooms |